c507m-95a中文版-钢筋混凝土椭圆形涵管、雨水管和污水管的标准规范【公制】.docVIP

C 507M PAGE 373 Designation: C 507M - 95a编号：C 507M - 95a METRIC公制 PAGE 356 Standard Specification forReinforced Concrete Elliptical Culvert, Storm Drain, andSewer Pipe [Metric] 钢筋混凝土椭圆形涵管、雨水管和污水管的标准规范【公制】 This specification is under the jurisdiction of ASTM Committee C-13 on Concrete Pipe and is the direct responsibility of Subcommittee C 13.02 on Reinforced Sewer and Culvert Pipe.本规范归ASTM负责混凝土管道的C-13委员会管辖，并由C 13.02加固污水涵管分委会直接负责。Current edition approved Nov. 10, 1995. Published January 1996. Originally published as C 507M - 80. Last previous edition C 507M - 95.现行版本于1995年11月10日批准，并于1996年1月出版。最初版本编号为C 507M-80， This standard is issued under the fixed designation C 507M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C 507M刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 This standard has been approved for use by agencies of the Department of Defense. Consult the DoD Index of Specifications and Standards for the specific year of issue which has been adopted by the Department of Defense.本标准已获得批准供（美国）国防部各部门使用。对于（美国）国防部采用的具体刊发年份，请查阅（美国）国防部规范与标准索引。 1. Scope适用范围 This specification covers reinforced elliptically shaped concrete pipe to be used for the conveyance of sewage, industrial wastes, storm water, and for the construction of culverts.本规范涵盖了污水、工业废水及雨水排水设施和涵洞建筑用椭圆形加固混凝土管。 Pipe designed for placement with the major axis horizontal shall be designated as Horizontal Elliptical Pipe. Pipe designed for placement with the major axis vertical shall be designated as Vertical Elliptical Pipe.应规定按照设计沿水平方向主轴铺设的管道为“卧式椭圆形管道”；而按照设计沿垂直方向主轴铺设的管道为“立式椭圆形管道”。 This specification is the metric counterpart of Specification C 507.本规范为规范C 507的配套公制规范。 Note 1—This specification is a manuf