奥迪全系自学手册（SSP）：SSP606_eSSP Audi 1.8l and 2.0l TFSI engines of the EA888 model family (third generation)_EN.pdfVIP

Self Study Programme 606 For internal use only Audi 1.8l and 2.0l TFSI engines of the EA888 model family (third generation) Audi Service Training The launch of the 1.8l TFSI engine marks the third generation of The engineers in Ingolstadt placed special emphasis on the follow- the successul EA888 four-cylinder engine family from Audi. ing priorities during the development cycle: The motives for this development are the increasingly stringent • A high proportion of identical parts for all engine versions exhaust emissions standards (EU 6) and, of course, the demands • Reducing engine weight for better fuel economy and lower CO2 emissions. To achieve these • Minimising intra-engine friction goals, the engine has been completely revised. • Increasing power output and torque in conjunction with good In addition to downsizing, downspeeding* is playing an increas- fuel economy ingly important role. • Improving comfort The global engine is built at Audis Hungarian engine plant in Another requirement is that the engines be suitable for use in all Györ and in Silao (Mexico) as well as in the Peoples Republic of markets, including those where low grade fuel is prevalent. China. Here, the EA888 engine family is produced in Shanghai and The global engine also has a key role to play against the back- Dalian, and will in future also be manufactured in Changchun. ground of increasing hybridisation. Like its predecessor, the engine is available in 1.8-litre and 2.0-litre For a detailed technical description of the version 0 engine, refer variants. It is used for a variety of vehicle platforms and Group to Self Study Programme 384 Audi chain-driven 1.8l 4V TFSI brands, and is available in a wide range of power ratings.