AS 2205.2.1-2003 (R2018) 国外国际规范下载.pdf

AS 2205.2.1—2003(Reconfirmed)2018-03- 16 STANDARDS AUSTRALIA RECONFIRMATION OF AS 2205.2.1—2003 Methods for destructive testing of welds in metal Method 2.1: Transverse butt tensile test RECONFIRMATION NOTICE Major stakeholders of this publication have reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change. Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice. Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 12 January 2018 . NOTES 1 AS 2205.2.1—2003 Reconfirmed 2018 Australian StandardTM A S Methods for destructive testing of welds in metal 2 2 0 5 . 2 . Method 2.1: Transverse butt tensile test 1 PREFACE This Standard was prepared by the Standards Australia Committee WD-006, Testing of Welds, to supersede AS 2205.2.1—1997. The objective of this edition is to update the Standard and