apa2308光驱耳机放大.doc

APA2308 Class AB Stereo Headphone Driver Features Applications ? Operating Voltage ? Portable Digital Audio Single Supply 3V to 6V Dual Supply ±1.5V to ± 3.0V ? High Signal-to-Noise Ratio 100dB ? Low Distortion -65dB Gereral Description ? Large Output Voltage Swing ? Excellent Power Supply Ripple Rejection ? Low Power Consumption ? Short-circuit Elimination ? Wide Temperature Range ? No Switch ON/OFF Clicks The APA2308 is an integrated class AB stereo head- phone driver contained in an SO-8, a DIP-8 or a TSSOP-8 plastic package. The APA2308 is capable of delivering 280mW of max. Output power to an 8? load or 110mW to a 32? load with less than 10% (THD+N) from a 5V power supply. The device is fab- ricated in a CMOS process and has been primarily developed for portable digital audio applications . ? Available in 8 pin SOP ,DIP or TSSOP Package Ordering and Marking Information APA2308 Package Code J : PDIP - 8 K : SOP - 8 O : TSSO P - 8 Handling Code Tem p. Range Temp. Range I : - 40 to 85 ° C Handling Code Package Code TU : Tube TR : Tape Reel APA2308 J : APA2308 XXXXX XXXXX - Date Code APA2308 K : APA2308 XXXXX XXXXX - Date Code APA2308 O : APA2308 XXXXX XXXXX - Date Code ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright ? ANPEC Electronics Corp. Rev. B.3 - Jun., 2003 1 .tw APA2308 Block Diagram Out A 1 8 V DD Inverting Input A Out B 2 7 Non-inverting Input A 3 - + + - 6 Inverting Input B V SS 4 5 Non-inverting Input B APA2308 Absolute Maximum Ratings Symbol Parameter Rating Unit VDD Supply Voltage 7 V TSC(O) Output Short-circuit Duration,at TA=25°C,PTOT=1W 20 S TA Operating Ambient Temperature range -40 to 85 °C TJ Maximum Junction Temperature 150 °C TSTG Storage Temperature Range -65 to +150 °C TS Soldering Temperature , 10 seconds 260 °C VESD Electrostatic Discharge -3000 to 30