stm32mdk启动代码分析.doc

STM32F107 SCHWESER STUDY NOTES ;******************** (C) COPYRIGHT 2010 STMicroelectronics ******************** ;* File Name : startup_stm32f10x_cl.s ;* Author : MCD Application Team ;* Version : V3.3.0 ;* Date : 04/16/2010 ;* Description : STM32F10x Connectivity line devices vector table for RVMDK ;* toolchain. ;* This module performs: ;* - Set the initial SP ;* - Set the initial PC == Reset_Handler ;* - Set the vector table entries with the exceptions ISR address ;* - Configure the clock system ;* - Branches to __main in the C library (which eventually ;* calls main()). ;* After Reset the CortexM3 processor is in Thread mode, ;* priority is Privileged, and the Stack is set to Main. ;* Use Configuration Wizard in Context Menu ;****************************************************************************** * ; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS ; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. ; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, ; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE ; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING ; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. ;****************************************************************************** * ; Amount of memory (in bytes) allocated for Stack ; Tailor this value to your application needs ; h Stack Configuration ; o Stack Size (in Bytes) 0x0-0xFFFFFFFF:8 ; /h Stack_Size EQU 0//定义堆栈空间大小为 0AREA STACK, NOINIT, READWRITE, ALIGN=3 //定义一个数据段，按 8 字节对齐 CHENGEHEFEI Chenge625@126.com - 1 - STM32F107 SCHWESER STUDY NOTES //AREA: 伪指令用于定义一个代码段或数据段 //NOINIT：指定此数据段仅仅保留了内存单元 //而没有将各初始值写入内存单元 //或者将各个内存单元值初始化为 0 //READWRITE: 代表可读可写 //ALIGN: 对齐伪指令 ALIGN //指令格式： ALIGN Num //指令格式： ALIGN = Dat //Num 必须是 2 的幂，如：2、4、8 和 16 等 //Dat 代表 2 的 Dat 次方运算，Dat=3 则 Num=8 //作用：数据段必须严格按照 Num 字节对齐 Stack_Mem SPACE Stack_Size //保留 S