sd8055完整的单节锂离子电池充电ic电路.doc

SD8055 IC原厂电话150-1351-9998，Q600mA Standalone Linear Li-Ion Battery Charger with Thermal Regulation in ThinSOT General Description Features The SD8055 is a complete constant-current/constant- Programmable Charge Current Up to 600mA voltage linear charger for single cell lithium-ion batteries. No MOSFET, Sense Resistor or Blocking Diode Its ThinSOT package and low external component Required count make the SD8055 ideally suited for portable Complete Linear Charger in ThinSOT applications. Furthermore, the SD8055 is s pecifically Package for designed to work within USB power specifications. Single Cell Lithium-ion Batteries No external sense resistor is needed, and no blocking Constant-Current/Constant-Voltage Operation diode is required due to the internal MOSFET with Thermal Regulation to Maximize Charge architecture. Thermal feedback regulates the charge Rate Without Risk of Overheating current to limit the die temperature during high power Charges Single Cell Li-Ion Batteries Directly operation or high ambient temperature. The charge from USB Port voltage is fixed at 4.2V, and the charge current can be Preset 4.2V Charge Voltage with ± 1.5% Accuracy programmed externally with a single resistor. The Charge Current Monitor Output for Gas SD8055 automatically terminates the charge cycle when Gauging the charge current drops to 1/10th the programmed Automatic Recharge value after the final float voltage is reached. When the Soft-Start Limits Inrush Current input supply (wall adapter or USB supply) is removed, Available in 5-Lead SOT-23 Package the SD8055 automatically ent ers a low current state, 2.9V Trickle Charge Threshold dropping the battery drain current to less than 2μA. The SD8055 can be put into shut down mode, reducing he supply current to 25μA.Other features include charge current monitor, undervoltage lockout, automatic recharge and a status pin to indicate charge termination and the presence of an input voltage. C/10 Charge