saej2012诊断故障代码定义.doc

SURFACE VEHICLE RECOMMENDED PRACTICE J2012 Issued 1992-06 Revised 2002-04 REV. APR2002 Superseding J2012 MAR1999 (R) Diagnostic Trouble Code Definitions Equivalent to ISO/DIS 15031-6:April 30, 2002 This document supersedes SAE J2012 MAR1999, and is technically equivalent to ISO/DIS 15031-6:April 30, 2002, except for minor reorganization of Paragraphs 1 and 2. Foreword—On-Board Diagnostic (OBD) regulations require passenger cars, and light and medium duty trucks, to report standardized fault codes for malfunctions detected by the OBD system. This document defines the standardized set of fault codes. SAE J2012 was originally developed to meet U.S. OBD requirements for 1996 and ISO 15031-6 was based on SAE J1962 and was intended to meet European OBD requirements for 2000 and later model year vehicles. This document is technically equivalent to ISO 15031-6, with new and revised fault codes included. SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright ?2002 Society of Automotive Engineers, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: 724-776-4970 (outside USA) Fax: 724-776-0790 Email: custsvc@ SAE WEB ADDRESS: SAE J2012 Revised APR2002 TABLE OF CONTENTS 1 Scope4 1.1 Purpose 4 1.2 Differences from ISO Document4 2 References