ASME SECTION II C SFA-5.02-SFA-5.02M-2008 国外国际规范.pdf

2008a SECTION II, PART C SFA-5.02/SFA-5.02M SPECIFICATION FOR FILLER METAL STANDARD A08 SIZES, PACKAGING, AND PHYSICAL ATTRIBUTES SFA-5.02/SFA-5.02M (Identical with AWS Specification A5.02/A5.02M:2007. In case of dispute, the original AWS text applies.) 1. Scope (a) ANSI Z49.1 Safety in Welding, Cutting, and Allied 1.1 This specification prescribes requirements for stan- Processes dard sizes and packages of welding filler metals and their The following ISO2 standard is referenced in the manda- physical attributes, such as product appearance and identi- tory sections of this document. fication. (a) ISO 544 Welding consumables — Technical delivery 1.2 This specification applies to covered electrodes with conditions for welding filler materials — Type of product, both solid and tubular core wires; bare solid and tubular dimensions, tolerances and markings. wires on spools, coils, and drums, or in straight lengths; and solid and sintered strip electrodes. It applies to all 3. Covered Electrodes fusion welding processes, except brazing, braze welding, and thermal spraying, or granular metallic or mineral prod- 3.1 Standard Sizes and Lengths. Standard sizes (diam- ucts, such as submerged arc fluxes, or other such products eter of the core wire) and lengths of electrodes are shown used in fusion welding processes.