UL1557-2009(ed_4) 国外国际规范.pdf

UL 1557 Electrically Isolated Semiconductor Devices SEPTEMBER 8, 2009 − UL 1557 tr1 UL Standard for Safety for Electrically Isolated Semiconductor Devices, UL 1557 Fourth Edition, Dated June 14, 2006 SUMMARY OF TOPICS: This revision to UL 1557 includes the following changes in requirements: Revision of Scope to Delete 600 V Limitation Text that has been changed in any manner or impacted by UL’s electronic publishing system is marked with a vertical line in the margin. Changes in requirements are marked with a vertical line in the margin and are followed by an effective date note indicating the date of publication or the date on which the changed requirement becomes effective. The revised requirements are substantially in accordance with Proposal(s) on this subject dated June 12, 2009. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard ″as is″ without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or fitness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall UL’s liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of UL’s Standards