AATCC 133 2009 耐热压色牢度.pdfVIP

AATCC Test Method 133-2009 Colorfastness to Heat: Hot Pressing Developed in 1969 by AATCC Commit- tions. All OSHA standards and rules 110 ± 2°C tee RR54; revised 1973, supersedes must also be consulted and followed. 150 ± 2°C AATCC 5-1962; reaffirmed 1976, 1979, 4.1 Good laboratory practices should 200 ± 2°C 1984, 1989; editorially revised 1981, be followed. Wear safety glasses in all 1985, 1986, 1991, 2001, 2002, 2008; laboratory areas. When necessary, other temperatures editorially revised and reaffirmed 1994, may be used, provided they are specifi- 1999, 2004, 2009. Technically equiva- 5. Apparatus and Materials (see 12.1) cally noted in the report (see Table I). lent to ISO 105-X11. 7.2 Specimens of materials that have 5.1 Heating device, providing even been subjected to any heat or drying heat transfer to the specimen from the top treatment must be allowed to condition 1. Purpose and Scope by close contact at a controlled tempera- (by exposure to air at 65 ± 2% RH and a ture (see 7.1, 12.2 and 12.5) and giving a temperature of 21 ± 1°C), before they are 1.1 This test method