Underwriters' Laboratories (美国)保险商实验所.ppt

Clause 1 - Scope Clause 2 - Definitions Clause 3 - General Requirement Tools shall be so designed and constructed that in normal use they function so as to reduce the risk of injury. Compliance is generally checked by carrying out all the relevant tests. Clause 4 - General Notes on Tests State the property of the tests, i.e.Type Test Recommend the test sequence in Appendix G Explanation on the condition of tool and battery Normal ambient temperature 20 ± 5 ℃. How to use alternative accessories, if applicable. How to set a regulating device or a similar control, if applicable. Clause 5 - Rating The maximum rated voltage is 30 V d.c. ≦ 30V d.c. Clause 6 – (Reserved) The Possible Requirements Can Be Referenced in Corresponding Section of Part 4 Clause 7 - Marking Statement for what should be marked on the tool. Order of severity: danger, warning, and caution Portion to be marked. Symbol. For example: V------volts n0------ No load speed Color on push-button without function other than opening the circuit. Indication of adjustment for the direction to set the regulating device. Language for cautionary markings. Easily visible,legible and durable marking. Clause 8 – Protection Against Electric Shock Handles and grasping surfaces containing switch operating means, shall be formed of insulating material or, if of metal, shall be adequately covered by insulating material. Clause 9 – (Reserved) The Possible Requirements Can Be Referenced in Corresponding Section of Part 4 Clause 10 - (Reserved) The Possible Requirements Can Be Referenced in Corresponding Section of Part 4 Clause 11 - Heating Tools shall not attain excessive temperatures under a no-load condition. The test can be carried out at the manufacturer’s option. The temperature rise shall not exceed the specified value. During the test, thermal cut-outs shall not operate Clause 12 – (Reserved) The Possible Requirements Can Be Referenced in Corresponding Section of Part 4 Clause 13 - (Reserved) T