土木工程毕业设计（论文）-6层框架结构综合楼设计.docVIP

毕 业 设 计 计 算 书 ——综合楼设计 院 系： 土木工程学院 专 业： 土木工程 学 号： 姓 名： 指导老师： 综合楼设计 摘?? 要 本设计为6层框架结构综合楼，总建筑面积约5700.24m2,主体结构高度约23.1m。地处6度抗震设防区域。本设计的计算内容主要有：结构设计方面，先根据轴压比确定柱和墙的截面尺寸及梁跨度估算梁板截面，计算出各构件的几何特征值和结构体系刚度特征值；然后对单，双向楼板进行内力计算和配筋；其次是按其分配墙所受的水平荷载作用，计算建筑物的自重质量。用 关键词? 框架结构，抗侧刚度，底部剪力法，内力组合 Abstract The design for the 6-storey frame structure of University Building, a total construction area of about 5700.24m2, the main structure of an altitude of about23.1 m. 6 degrees seismic fortification is located in the region, soil type is a category 2. Structural design is the focus of this design. The design of the main terms: structural design aspects，first axial compression ratio determined in accordance with columns and walls of the section size and beam span estimates beam cross section, calculated the geometric characteristics of the various components of stiffness and structural characteristics of the value system and secondly walls suffered their distribution is the level of load, the calculation of the quality of building self-respect.The calculation of the basic structure of the natural cycle, the calculation of the level of wind loads and seismic shear wall under the internal forces and displacement (of which calculated using shear at the bottom of the earthquake, the building Stiffness along the high quality and relatively uniform distribution, the height of Keywords? frame struture，resist lateral stiffness，bottom shear force method，combination of internal force 目 录 摘要 ……………………………………………………………………..…Ⅰ Abstract ………………………………………………………………..………II 前言 ……………………………………………………………………………1 第一章 设计基本资料 ……………………………………………………… 2 §1.1设计原始资料…………………………………………….………………2 §1.1.1工程概况及自然条件…………………………………..………………2 §1.1.2材料选用 ………………………………………………….……………2 §1.2 结构选型 …………………………………………………………………2 §1.3 梁截面、梁跨度及柱高的确定………………………….………………3 §1.3.1 截面选择………………………………………………...………………3 §1.3.2 框架柱截面尺寸的轴压比限值计算 …………………….…………3 §1.4 刚度计算 …………………………………………………………………4 第二章 荷载计算 ……………