丰田工程标准 TSM 5525G 聚脂合成橡胶成型材料.pdfVIP

CONFIDENTIAL DO NOT REPRODUCE CLASS TOYOTA ENGINEERING STANDARD TSM5525G C2 POLYESTER ELASTOMER MOLDING MATERIALS 1. Scope This standard covers the classification method, according to quality, for polyester elastomer molding materials (hereinafter referred to as molding materials) used for automotive parts. It also covers the material performance. Materials for ball joint seats are excluded from the scope of this standard. As to the functions, performances and design qualities of products as vehicle parts or as themselves, conform to specifications in separate drawings etc. 2. Composition The molding materials are elastic materials that belong to the thermoplastic polyester group, containing PBT (polybutylene terephthalate) as the main component and elastic materials co-polymerized with it. These materials are injection-, extrusion-, and blow-molded. Engineering Administration Div. Prepared and Written by: © TOYOTA MOTOR CORPORATION Organic Material Dept. Established/ 7 Revised: Material Engineering Div. 2 May.2001 NOTES: The recipient of this standard shall undertake the following confidentiality obligations upon the receipt of this standard. l The recipient shall discard by shredding or fire, or return to Toyota Motor Corporation if appropriate, the documents contained in this standard when they are no longer necessary due to the termination of the work concerned or the revision of c