中小城镇城市污水处理A2O工艺设计.pdfVIP

2 中小城镇城市污水处理A /O 工艺设计 针对该城市的水质水量情况，该污水厂的污水处理流程为：从泵房到沉砂 池，进入反应池，进入辐流式二次沉淀池，最后出水；污泥的流程为：从反应 池排出的剩余污泥进入集泥配水井，再由污水泵送入浓缩池，再进入消化池， 最后进入机房脱水，最后外运处置。 本文对工艺流程中各个单体构筑物的尺寸进行了详细的设计计算，对整个 污水处理厂的平面、高程布置做了说明，并对污水处理厂进行了工程概预算的 分析和计算。据相关资料的计算结果表明，本设计的最终出水完全可以达到国 家二级排放标准。 2 关键词：中小城镇，城市污水，A /O ，同步脱氮除磷 Abstract 2 The sewage treatment of the middle or small towns was designed as A /O process. Due to the city water quality and quantity, this paper process in each monomer structure on the size of a detailed design calculations, the sewage treatment VI 2 中小城镇城市污水处理A /O 工艺设计 plant on the plane, elevation layout are illustrated, and the sewage treatment plant for the project budget analysis and calculation. According to related data results show that the design of the final effluent can meet the national emission standards. The sewage treatment process can be described like that: from the pumping station to a grit chamber, than into the reactor, and the secondary sedimentation tank (radial flow style), than the final effluent, about sludge process: the remaining emissions from the reactor sludge into the mud with water wells, concentrated by the water pump into the pool, re-entering the digester, and finally into the room dehydration, the final disposition of transporting. 2 Keywords ：towns, urban sewage, A /O, simultaneous nitrogen and phosphorus removal