机械专业职场英语[杨成]第三章.pptVIP

Scene fifteen Casting The completed drag is now turned over and the upper, or cope, portion of the moulding box positioned over it. The cope half of the pattern is placed in position, correct alignment being ensured by means of small dowel pins. Patterns for the necessary feeder, runner and riser are also placed in position. Feeder and runner channels should be placed so as to give an even distribution of metal into the mould cavity. The risers should coincide with the highest points of the mould Scene fifteen Casting Pouring ceases when liquid metal appears at the top of the risers and the _____________ channel is also full. When the metal that has been poured into a sand mould has fully _____________ the mould is broken and the casting is removed. The casting still has the runner and risers attached _____________ it and there will de sand adhering _____________ portions of the surface. Sand cores and risers are cut Scene Six Dimension measurement A machinist is mainly concerned with the measurement of _______________; that is the distance along a line between two ____________. It is length that defines the ____________ of most objects. Width and depth are simply other names for ____________. Machinist measures length in the basic units of ___________ measure such as inches, millimeters, and in advanced metrology wavelengths of light. Scene Six Dimension measurement In addition to the measure of ___________ and _____________-, a machinist also needs to measure such things as ______________, concentricity, ______________, and flatness. He or she also occasionally comes in contact with measurements that involve ________________, spheroid, and _________________. However, many of these more specialized measurement techniques are in the ________________ of the inspector or laboratory __________________ and appear infrequently in general machine shop work. Scene Seven Surface cut Customary 习惯的，通常的 Leas