Ansys Adjoint求解器 2020R2功能介绍.pdfVIP

Adjoint Solver 2020R2 Features Min Xu, Chris Hill Agenda • Design Tool Improvements • Export Iso surface to STL files • Export of accumulated total displacement and compare the mesh with the reference mesh • Offset Option for the bounded-by-surface condition • Simply the region condition • Enhancement for the direct interpolation method • Support symmetric region condition • Support enable monition condition for both the Cartesian and cylindrical coordinates. • Hidden features: • Periodic repeat region condition for the direct interpolation method • Radial Basis Function (RBF) morphing method • Gradient optimizer Improvements • Adjoint Turbulence Equation (GEKO) • Adjoint GEKO optimizer (Hidden features) 2 Design Tool Improvements I Export iso surfaces into STL files • export the generated topology surfaces. • export iso surface for mesh adaptation during mesh regeneration. • Other applications. 3 Design Tool Improvements II • This function helps to compare the initial and optimized geometries after multiple loops of design iteration, fulfilling the requests by multiple customers. • Export the total displacement (Export Displacement) and compare the mesh with the reference mesh (Overlay Reference) • Set/Reset Reference Mesh • Limitation: The reference mesh is only saved into the case file in the CFF format. • Limitation: Do not support remeshing or other operations inducing grid count changes. 4 Design Tool Improvements II Hidden feature: After the reference mesh is set, you can visualize the contour/vector plot of the displacement of the current mesh w.r.t. the reference mesh by enabling the hidden feature rpvar (rpsetvar adjoint/show-hidden-features? #t) 5 Design Tool Improvements III The wall_deforming surface