3D打印与创客 选区激光熔化成形与设备 课件：SLM成型特点(中英）.pptxVIP

《3D打印与创客》课程《3D printing and Maker》Module 1 introduction模块一 绪论Unit 2. 3D printing molding process and equipment单元二、3D打印成型工艺与设备任务三 选区激光熔化成型与设备Task 1 Selective Laser Melting and equipment知识点2 SLM成型特点任课教师 曾鹏1. characteristics of Selective Laser MeltingLecturer Zeng Peng问题导入问题导入Lead-inSLM的成型特点是什么？what is the characteristics of SLM?目录ContentsSLM的成型特点01characteristics of SLMSLM的优缺点02Advantages and disavantages of SLM1.SLM的成型特点characteristics of SLM1、成形工艺简单，产品性能优良； SLM技术能直接制成终端金属产品，不借助铸模锻模技术，零件机械性能与锻造工艺所得相当，尺寸精度可达0.1mm，表面粗糙度Ra可达 30～50μm。1. Simple process and excellent performance; SLM technology can be directly manufactured into terminal metal products without the help of casting die technology. The mechanical properties of the parts are equivalent to those obtained from forging . The dimensional accuracy can reach 0.1mm, and the surface roughness Ra can reach 30 ~ 50 μm.1.SLM的成型特点characteristics of SLM2. Easy to form complex structure and high material utilization;SLM technology is suitable for all kinds of complex shapes of workpiece, as well as those that cannot be manufactured by traditional methods. And the material consumption of the parts is basically the same as the actual parts, the material utilization is as high as more than 90%.2、易成形复杂结构，材料利用率高； SLM技术适合各种复杂形状的工件，以及用传统方法无法制造的复杂工件。且零件消耗的材料基本上与零件实际相等，材料的利用率高达90%以上。1.SLM的成型特点characteristics of SLM3. Meet personalized needs and have wide application fields;SLM technology can be used to meet some personalized requirements for manufacturing.For example, human teeth are not suitable for mass production due to their differences but SLM can do.3、满足个性化需求，应用领域广； 利用SLM技术可以满足一些个性化需求的制造。如制造人的牙齿，由于人的牙齿各不相同，不适合批量制造，用SLM便可以实现Disadvantages of SLM technology:1. Low speed;2. Equipment stability and repeatability need to be improved;3. Surface roughness needs to be improved;4, the whole set of equipment is expensive, high energy consumption;5. SLM technology is complicated;6. Large residual stress is generatedAdvantages and disavan