3D打印与创客 “手电筒”3D打印成型 课件：手电筒3D打印成型（中英）.pptxVIP

手电筒创新设计与3D打印;打印机printer;1;调平步骤Leveling steps ;调平步骤Leveling steps ;调平步骤Leveling steps ;开机、点击主页面“工具”点击“预热”点击打印“温度”等待温度达到190C°至210C°当温度达到时点击返回。 Power on, click tools on the main page, click preheat, click print temperature, and wait for the temperature to reach 190C° to 210C°. When the temperature reaches, click return.;点击“装卸材料”（此时我们把材料剪出一个斜口方便进料并且把材料前端掰直）。 Click loading and unloading materials (at this point, we cut the material into an oblique opening to facilitate feeding and straighten the front end of the material).;然后把材料插进导料管，当材料插不进时点击屏幕上的进料，直到打印头出丝然后点击停止。Then insert the material into the guide tube, and when the material cannot be inserted, click the feed on the screen until the print head comes out and then click stop. ;1、将SD卡插入打印机上方的SD卡槽内点击打印图标。 1. Insert the SD card into the slot above the printer and click the print icon. 2、选择自己需要打印的模型名称。2. Select the model name you want to print.;工作状态：打印机加热头设定温度及实际温度、加热床设定温度及实际温度、打印速度、打印进度条、已使用打印时间、剩余打印时间等。 Working status: setting temperature and actual temperature of printer heating head, setting temperature and actual temperature of heating bed, printing speed, printing progress bar, used printing time, remaining printing time, etc.;;;