英制螺纹说明及螺纹标注方法.docVIP

. 英制螺紋說明及螺紋標注方法 一、嚴格地說，UN、UNR、UNC、UNF、UNS以及UNEF是螺紋系列的規定代號，而不是某些英文片語的縮寫： 統一螺紋：Unified Screw Threads( 由英國(United Kingdom)、加拿大(Canada)和美國(United States)於948年共同制定； UN：外螺紋設計牙型根部可平可圓(A flat root contour is specified ,but it is necessary to provide for some threading tool crest wear, hence a rounded root contour cleared beyond the 0.25p flat width of the Basic Profile is optional.) UNR：外螺紋設計牙型根部必須為圓弧(In order to reduce the rate of threading tool crest wear and to improve fatigue strength of a flat root thread, the Design Profile of the UNR thread has a non-reversing continuous curved root