基于PROTEUS软件的计算器设计[整理].pdfVIP

嵌入式软件院，版权所有，请勿转载/销售。如有侵权，将追究相应法律责任。 基于PROTEUS 软件的计算器设计 摘 要 近年来随着计算机在社会领域的渗透, 单片机的应用正在不断地走向深入，在很多 先进的系统中，单片机往往是作为一个核心部件来使用。在日常生活中，计算器的应用 更是极为普遍，已经成为我们日常生活中必不可少的计算工具，而它的主要部分就是单 片机。 本设计介绍了单片机在计算器领域的应用技术，以常用的MCS-51 系列（本次选用 8051 ）单片机为基础，简单介绍了单片机与键盘之间以及与显示器之间的应用技术。 本次设计中的键盘的识别是一个非常重要的部分，我们此次所用的是非编码键盘， 只需要预先写入识别程序，这种方法使得我们的硬件设计变的简洁许多。在设计过程中 由于实际情况的要求，我们利用部分器件对单片机进行了数据扩展，以满足计算器系统 的工作要求。 设计中利用键盘进行数据的输入，然后通过单片机对其进行处理，最后就可以通过 LCD 显示器显示出来。 关键词：单片机；键盘；显示器；LCD 如需程序/Word 版本，请访问: 嵌入式软件院。 1 1 / 46 嵌入式软件院，版权所有，请勿转载/销售。如有侵权，将追究相应法律责任。 The calculator design based on PROTEUS Abstract With the infiltration in the social field of the computer in recent years, the application of the one-chip computer is moving towards deepening constantly, in very many advanced systems, the one-chip computer often was took a core part used. In the daily life, the calculator application is extremely universal, already became in our daily life the essential computation tool, and further its main part was the one-chip computer. This design introduced the one-chip computer in the calculator domain application technology, take the commonly used MCS-51 series the one-chip computer as a foundation(this time selects 8051), introduced between the one-chip computer and the keyboard as well as with the monitor between application technology simply. In this design keyboard recognition is an extremely important part, this time we use the right and wrong code keyboard, only needs to read in the recognizer in advance, this method causes our hardware