化妆品配方与生产技术 面膜的配方设计及生产工艺 面膜-英文.ppt

2. The order of the upper membrane is the forehead - cheeks - chin - mouth - nose, the time is 25 to 30 minutes. 3. When unloading the film, first loosen the hard film, or ask the customer to slightly move the facial muscles (smile or drum cheeks), then start from the sides of the lower jaw, gradually loosen the facial mask around the face, and gently lift it up. Finally wash the face thoroughly. Precautions for using hard mask1. Because gypsum has a strong water absorption and astringent effect, and has a certain degree of compression stimulation, the hard mask should not be used frequently, usually once a month. 2. When adjusting the film, you must master the amount of water. Too much water, the film will be too thin and not easy to form; too little water will cause the film to condense quickly and its too late to fall on the face. 3. Pay attention to the back of the ear, the hairline, the nostrils, and the lower jaw when cleaning. Do not leave any membrane residue. If you accidentally stick the hair into the plaster mold, do not harden uncover it. You can first knock the film into small pieces, then peel it down by little, and the movement should be gentle. 4. In case of allergies, apply warm water repeatedly and gently clean the face to completely remove the residual sensitizing source, and drink plenty of water, usually 2 to 4 hours to recover. 1. Train yourself to judge the ratio of water to hard film powder. 2. Train yourself to judge the time required for the film to coagulate. 3. Train the speed and procedure of the film. Three training for beginners 2. Soft mask A soft mask is a powdery mask. The characteristics of the soft film are: the film formed by water coagulation and solidification is fine and soft, mild in nature, non-irritating, and has no pressure on the skin, and the skin moisture can be maintained without applying a base cream. MaskName:Tan ying Contents Ⅰ. Definition, history, and Classification of Mask Ⅱ.