2018年中等职业学校新能源汽车技术培训班(省培)课程 项目4 混合动力技术 01-MO COROLLA HV.pptVIP

  • 7
  • 0
  • 约1.15万字
  • 约 31页
  • 2020-12-13 发布于北京
  • 举报

2018年中等职业学校新能源汽车技术培训班(省培)课程 项目4 混合动力技术 01-MO COROLLA HV.ppt

* 尺寸 总尺寸 * 项目 [mm (in.)] COROLLA HV COROLLA 轮胎尺寸 195/65R15 205/55R16 195/65R15 205/55R16 (1) 长 4620 (181.9) ? ? ? (2) 宽 1776 (69.9) ? ? ? (3) 高 1460 (57.5) ? ? ? (4) 轴距 2700 (106.3) ? ? ? (5) 悬架 前 941 (37.0) ? ? ? (6) 后 980 (38.6) ? ? ? (7) 轮距 前 1529 (60.2) 1517 (59.7) 1529 (60.2) 1517 (59.7) (8) 后 1534 (60.4) 1522 (59.9) 1534 (60.4) 1522 (59.9) (3) (6) (4) (1) (5) (2) (7), (8) [空载车辆] * * * * * * [系统性能] 最大系统输出: 100 kW 系统输出: 发动机输出和HV电池输出 [System Performance] Max. System Output: 100 kW System Output: Engine Output and HV Battery Output * [8ZR-FXE 发动机] 4-气缸, 直列, 16气门, 双顶置凸轮轴, 链条驱动带 配备 VVT-i 汽油机 排量: 1798 cm3 (109.7 cu. in.) 最大输出功率: 73 kW @ 5200 rpm 最大输出扭矩: 142 N·m @ 4000 rpm [8ZR-FXE Engine] 4-cylinder, In-line, 16-valve, DOHC, Chain Drive with VVT-i gasoline engine Displacement: 1798 cm3 (109.7 cu. in.) Max. Output: 73 kW @ 5200 rpm Max. Torque: 142 N·m @ 4000 rpm * * 最大系统输出功率:表示发动机输出+ HV电池输出. Maximum System Output: The maximum output indicates engine output + HV battery output. * * [手动型倾斜可伸缩式转向柱] 倾斜量: 30 mm (1.18 in.) 伸缩量: 40 mm (1.57 in.) [Manual Type Tilt and Telescopic] Tilt: 30 mm (1.18 in.) Telescopic: 40 mm (1.57 in.) * * HV 电池单元 电池模组 (DC 201.6 V) 接线盒: 连接与断开高压电源回路 电池智能单元: 检测HV 电池状况 (电压, 电流 和温度) 逆变器 升压转换器: 将来自HV电池的 DC 201.6 V 升压至最高 DC 650 V 逆变器: 将来自升压转换器的高压直流电转换成交流电以驱动 MG1 and MG2 MG ECU: 控制升压转换器和逆变器 DC/DC 转换器用来配备辅助电池 HV Battery Unit Battery modules (DC 201.6 V) Junction block: Connects and disconnects the power source of the high-voltage circuit Battery smart unit: Detects the HV battery conditions (voltage, current and temperature) Inverter with Converter Assembly Boost converter: Boosts DC 201.6 V from the HV battery to max. DC 650 V Inverter: Converts high-voltage DC from the boost converter into AC for driving the MG1 and MG2 MG ECU: Controls the boost converter and the inverter DC/DC converter for auxiliary battery * * 换档杆始终处于中间位置 换至D档域: 向左向下拨动换档杆 换至S档域: 向下拨动换档杆 (仅当处于D档域时可换至S档) 换至N档域: 向左拨动并保持换档杆 换至R档域: 向左向上拨动换档杆 The shift lever is always in a

文档评论(0)

1亿VIP精品文档

相关文档