《NICE7000电梯一体化控制器用户手册》-Tromp专用-英文20181130-A01-19010445.pdf

User Guide TMP500 Integrated Elevator Controller Integrated Elevator Controller AC Drive User Guide A01 Data code Preface Preface Thank you for purchasing the TMP500 integrated elevator controller. The TMP500 is a new-generation integrated elevator controller developed by Tromp based on a large number of applications and combining new industrial features. The TMP500 has the following advantages: 1. It supports high-performance vector control and open-loop low speed running. It can drive both AC asynchronous motor and permanent magnetic synchronous motor (PMSM), and implement switchover between the two types of motors easily by modifying only one parameter. 2. It supports open-loop low speed running, group control on up to eight elevtors (no additional external device required), and CANbus and Modbus communication protocols for remote monitoring, which reduces the required quantity of travling cables. 3. It supports a maximum of 56 floors and is widely applied to elevators used in the residence, office buildings, shopping centers, and hospitals. This manual describes the correct use of the TMP500, including product features, safety information and precautions, installation, parameter setting, commissioning, and maintenance inspection. Read and understand the manual before using the product, and keep it carefully for reference to future maintenance. The personnel who involve in system installation, commissioning, and maintenance must receive necessary safety and use training, understand this manual thoroughly, and have related experience