材料力学英文课件：8+ Combineddeformations_03.pptVIP

1 Mechanics of Materials, SI Version SEVENTH EDITION Chapter 8 Applications of Plane Stress (Pressure Vessels, Beams, and Combined Loadings) 2 Chap 8+ Combined deformations New terms and phrases 8.1+ Introduction 8.2+ Doubly symmetric beams with inclined loads / Skew bending 8.3+ Combined deformation of tension/compression and bending · Eccentric axial loads 8.4+ Combined deformation of bending and torsion 3 New terms and phrases Combined loadings 组合受力 Combined deformations 组合变形 method of superposition 叠加法 Critical section 危险截面 Critical point 危险点 Strength criterion 强度条件 Stress superposition 应力叠加 Kernel of section 截面核心 Unsymmetrical bending 非对称弯曲 Skew bending 斜弯曲 Eccentric tension or compression 偏心拉压 Combined deformation of tension/compression and bending 拉弯/压弯组合变形 Combined deformation of bending and torsion 弯扭组合变形 4 Chap 8+ Combined deformations New terms and phrases 8.1+ Introduction 8.2+ Doubly symmetric beams with inclined loads / Skew bending 8.3+ Combined deformation of tension/compression and bending · Eccentric axial loads 8.4+ Combined deformation of bending and torsion 5 8.1+ Introduction(P502) Combined deformations - Structural members may produce two or more types of simple deformations when subjected to complex external loads . Solution method - method of superposition (叠加法） 6 Method of superposition for combined deformations ①Analyse of external forces: External forces are reduced along the centroid of the section and resolved along the principal axes of the cross section. ②Analyse of internal forces: Find the internal forces from equilibrium equation and plot the internal forces diagrams corresponding to each external force , determine the critical section . ③Analyse of stresses: Calculate the normal and shear stresses at the selected point on the critical section. Find the critical points and plot the stress elements of critical points. Determine the principal stresses and maximu