GMDSS普通操作员 第12讲：Passage 27 第12讲：Passage 27.ppt

航运系航海教研室 航运系航海教研室 航运系航海教研室 航运系航海教研室 航运系航海教研室 航运系航海教研室 航运系航海教研室 航运系航海教研室 航运系航海教研室 航运系航海教研室 Passage 27 DSC uses a DIGITAL signal to send a specific set of information. The information that can be passed by a DSC call includes: ① The callers MMSI (a number that uniquely identifies the caller, similar to a phone number). ② The MMSI of the unit being called. This can be a specific unit or a group of units (for example, all Coast Guard units). ③ The callers location, and time of location. This can be derived directly from an interface to a GPS/SatNav receiver, or it can be entered manually. Location and time of location are normally only transmitted with a distress alert. Passage 27 ④ The requested working frequency and mode. This is the frequency and mode of emissions that will be used to transact business. DSC is only used for call set-up. Once the call is established the two parties change to a working frequency and mode to continue the call. ⑤ The priority of call (Distress, Urgent, Safety, Routine). DSC can be used for anything from distress calls, to setting up a routine phone patch through a commercial coast station. ⑥ For distress calls, the DSC call can even indicate the type of emergency (fire, flooding, etc. ). Passage 27 1. Which of the following statements is true? A. Ambiguity encoding is adopted by DSC. B. Signals are encoded digitally. C. DSC can be used for voice transmission. D. Analog signals can be transferred by DSC. 正确答案：B Passage 27 2. What is MMSI? A. The abbreviation Maritime Mobile Service Identity. B. The abbreviation Motor Mechanic Service Identification. C. It is a number encoded in SSB equipment. D. It is used to identify mobile earth stations. 正确答案：A Passage 27 3. Under what circumstance the callers location and time of location should be encoded in the calling sequence? A. When the operator desires to call another ship. B. When the operator desir