HC44X橡胶瓣逆止阀中英文说明书.docxVIP

HC44X橡胶瓣逆止门Check Valve 说明书(Instructions) 南通市力沛流体阀业有限公司 Nantong Lipei Fluid Valves Co., Ltd. 1、产品概述： Product overview: 橡胶瓣逆止阀主要由阀体、阀盖、阀瓣组成，其中橡胶瓣由钢板作承压件及强化尼 龙布做衬底，外层采用热硫化整体包胶技术制成，阀瓣开关寿命可达 100 万次。 The rubber flap check valve is mainly composed of a valve body, a bonnet, and a flap. The rubber flap is made of a steel plate as a pressure-bearing member and a reinforced nylon cloth as a substrate. The outer layer is made of hot vulcanization overall encapsulation technology. Up to 1 million times. 该阀采用全流面积式，具有水头损失小，不易堆积杂物，维修简便等特性。 The valve adopts the full flow area type, which has the characteristics of small head loss, no accumulation of debris, and easy maintenance. 此阀由于关闭行程小， 行程角度仅 35°即可达到全关闭， 关闭速度快。 该阀主要适 用于给排水系统，可安装于水泵出口处，以防止倒流及水锤对泵的损害。该阀还可以安 装在蓄水池进出水管的旁通管上，以防止池水倒流至给水系统中。该止回阀一般适用于 清静介质，不宜用于含有固体颗粒和粘度较大的介质。 Due to the small closing stroke of this valve, the stroke angle can be fully closed at only 35°, and the closing speed is fast. The valve is mainly suitable for water supply and drainage systems, and can be installed at the outlet of the water pump to prevent backflow and water hammer damage to the pump. The valve can also be installed on the bypass pipe of the inlet and outlet pipes of the reservoir to prevent the water from flowing back into the water supply system. The check valve is generally suitable for clean media, not suitable for media containing solid particles and high viscosity. 2、产品特点： Product features: 1、阀座采用大倾斜角设计，阀瓣关闭行程小； The valve seat adopts a large inclination angle design, and the valve flap closing stroke is small; 2、阀瓣采用热硫化整体包胶技术，使用寿命可达 100 万次； The valve flap adopts thermal vulcanization integral encapsulation technology, and the service life can reach 1 million times; 3、耐冲刷，密封性能好； Scour resistance and good sealing performance; 4、产品结构简单、保养、维修方便。 The product structure is simple, easy maintenance and repair. 3、主要性能参数： 3. Main performance parameters: 公称压力 PN (Nominal pressure ) 10 16 25 壳体试验压力 Shell test pressure 1.5MPa 2.4MPa 3.75MPa 密封试验压力