日本验船师全套培训资料pipingoutfit.ppt

Size and arrangement of deck scuppers Standard of diameter and distance Ship s Breadth (m) B18 18B32 32B48 48B Diameter (mm) 100 125 150 150 Distance (m) about 25 about 25 about 25 about 20 Minimum thickness of scupper pipes Dia. (mm) Passing Cargo oil tank Hold (non-protection) Hold (with protection) 100 13.5 13.5 8.6 125 15.9 15.9 9.5 150 18.0 18.0 11.0 Arrangement of deck scupper (round gunwale) Arrangement of deck scupper (round gunwale) Bilge from steering engine room Bilge from forecastle space Bilge from refrigerated cargo space Scupper from living quarters Scupper pipe arrangement in living quarters Discharge lines from living quarters Inboard discharge (1) to bilge well (2) 1 deck control ANRV (3) 1 deck control stop valve and 1 ANRV General (4) 1 E/R control stop valve and 1 ANRV (5) 1 ANRV above LWL and 1 ANRV below LWL Alleviation (Inboard end) (6) 1 stop valve and 2 ANRV below LWL (7) 1 ANRV Collecting (8) 1 stop valve always close tank Shell (9) 1 ANRV depends on the shell penetration penetration Outboard discharge (1) Inboard discharge (2) 1 deck control ANRV (3) 1 deck control stop valve and 1 ANRV (4) 1 E/R control stop valve and 1 ANRV (5) 1 ANRV above LWL and 1 ANRV below LWL (6) 1 stop valve and 2 ANRV below LWL (7) 1 ANRV (8) 1 stop valve always closed (9) Shell penetration Comparison of height to actual size of ships Reinforcement of distance piece (1/3) Reinforcement of distance piece (2/3) Reinforcement of distance piece (3/3) Attachment to shell plate E/R control ANRV Piping Outfit September 2004 Penetration piece Kind of pipe Bending radius Insufficient pipe support Resonance of pipe Protective arrangement of pipe Protection of air pipe head Non-self closing air pipe head Self closing pipe head (ball float type) Self closing pipe head (disk float type) Number of air pipe (exceptional) If there is only one air pipe….. Sectional area of air pipe Height of air pipe Air pipe on forecastle deck Air pipe for fuel oil tank Pipe head of