模具专业英语 Lesson 7 Mold Cavities and Cores.pptVIP

Lesson 7 Mold Cavities and Cores PPT模板下载：/moban/ 行业PPT模板：/hangye/ 节日PPT模板：/jieri/ PPT素材下载：/sucai/ PPT背景图片：/beijing/ PPT图表下载：/tubiao/ 优秀PPT下载：/xiazai/ PPT教程： /powerpoint/ Word教程： /word/ Excel教程：/excel/ 资料下载：/ziliao/ PPT课件下载：/kejian/ 范文下载：/fanwen/ 试卷下载：/shiti/ 教案下载：/jiaoan/ PPT论坛： TABLE OF CONTENT 1 Passage 2 New Words and Expressions 3 Notes 4 Reading Material Lesson 1 What is Dies and Molds 1. Integer Cavity and Core Plates When the cavity or core is machined from a large plate or block of steel, or is cast in one piece, and used without bolstering as one of the mold plates, it is termed an integer cavity plate or integer core plate. This design is preferred for single-impression molds because of the strength, smaller size and lower cost characteristics. It is not used as much for multi-impression molds as there are other factors such as alignment which must be taken into consideration. 1．整体式型腔和型芯板 当型腔或型芯由一块大的钢板或钢块加工而成，或者铸成一体，不需使用支撑件而形成一块模板时，就构成整体式型腔板或型芯板。这种设计因具有强度高，尺寸小和成本低的特性，主要应用在单型腔模具中。整体式型腔和型芯一般不用在多型腔模具中，因为（多型腔模具）设计时必须考虑一些其他因素，例如模具的找正等。 Lesson 1 What is Dies and Molds Of the many manufacturing processes available for preparing molds only two are normally used in this case. These are (a)a direct machining operation on a rough steel forging or blank using the conventional machine tools, or (b)the “precision” investment casting technique in which a master pattern is made of the cavity and core.① The pattern is then used to prepare a casting of the cavity or core by a special process. A 4.25% nickel-chrome- molybdenum steel (BS 970-835 M30) is normally specified for integer mold plates which are to be made by the direct machining method. The precision investment casting method usually utilizes a high-chrome steel. Lesson 1 What is Dies and Molds 在众多模具制造的方法中，用于加工整体式型腔或型芯板的方法主要有两种：（a）使用传统机床对粗锻钢材坯料直接加工；（b）利