lm393常用应用电路.docxVIP

Low Offset Voltage Dual Comparators The LM393 series are dual independent precision voltage comparators capable of single or split supply operation. These devices are designed to permit a common mode range±to±ground level with single supply operation. Input offset voltage specifications as low as 2.0 mV make this device an excellent selection for many applications in consumer automotive, and industrial electronics. Wide Single±Supply Range: 2.0 Vdc to 36 Vdc Split±Supply Range: ±1.0 Vdc to ±18 Vdc Very Low Current Drain Independent of Supply Voltage: 0.4 mA Low Input Bias Current: 25 nA Low Input Offset Current: 5.0 nA Low Input Offset Voltage: 2.0 mV (max) LM393A 5.0 mV (max) LM293/393 Input Common Mode Range to Ground Level Differential Input Voltage Range Equal to Power Supply Voltage Output Voltage Compatible with DTL, ECL, TTL, MOS, and CMOS Logic Levels ESD Clamps on the Inputs Increase the Ruggedness of the Device without Affecting Performance Representative Schematic Diagram (Diagram shown is for 1 comparator) VCC + Input ± Input Output R2 2.1 k R4 Q4 Q5 Q6 Q14 Q3 2.0 k F1 Q9 Q10 Q1 Q16 Q8 Q12 Q2 Q15 R1 Q11 4.6 k  Order this document by LM393/D LM393, LM393A, LM293, LM2903, LM2903V SINGLE SUPPLY, LOW POWER DUAL COMPARATORS SEMICONDUCTOR TECHNICAL DATA 8 1 SUFFIX PLASTIC PACKAGE CASE 626 1 SUFFIX PLASTIC PACKAGE CASE 751 (SO±8) PIN CONNECTIONS Output A 8 VCC Inputs A + ± Inputs B Gnd 4 + 5 (Top View) ORDERING INFORMATION Operating Device Temperature Range Package LM293D TA = ±25° to +85°C SO±8 LM393D TA = 0° to +70°C SO±8 LM393AN,N Plastic DIP LM2903D TA = ±40° to +105°C SO±8 LM2903N Plastic DIP LM2903VD TA = ±40° to +105°C SO±8 LM2903VN Plastic DIP Motorola, Inc. 1996 Rev 1 MOTOROLA ANALOG IC DEVICE DATA 1 LM393, LM393A, LM293, LM2903, LM2903V MAXIMUM RATINGS Rating Symbol Value Unit Power Supply Voltage VCC +36 or ±18 Vdc Input Differential Voltage Range VIDR 36 Vdc Input Common Mode Voltage Range VICR ±0.3 to +36 Vdc Output Short Circuit±to±Ground IS