Unity3D虚拟现实交互制作（拓展） 第九章 环境设置与交互 6.Deploying Your VR Project.docx

Deploying Your VR Project In this article we will discuss deploying to two of the platforms supported by the VR Samples project - DK2 and Gear VR. There are of course a variety of other deployment platforms for VR in various stages of development, and we hope to expand the scope of these articles to support those which release consumer products in the future. Deploying to the Oculus DK2 While you can easily test your project on the DK2 just by pressing play in Unity, you’ll need to deploy your project for testing outside of Unity occasionally, and for distribution. Deploying your project for DK2 is quite straightforward. Ensure that the DK2 is working correctly, and that your current selected platform is Standalone (see The Basics section in our? Getting Started in VR with Unity?article).  Ensure that your scene(s) are included under the?Scenes In Build, click?Build and Run?and Unity will export a standard Windows build with a .exe file and supporting content folders. Run the .exe file as usual, and if a project is is built with VR support enabled, it will attempt to start in VR mode on the DK2 automatically. If you have issues with running the .exe, you may wish to optionally force VR mode, by using the command line argument?-vrmode, which is covered in the? VR Overview?section of the Unity manual. You might also wish to use a batch file, as shown below: BuildName.exe -vrmode oculus Oculus have additional information on? building for DK2. Deploying to the Gear VR To set up your environment for Gear VR development, you’ll need to set up both Unity and your phone for Android development first. Keep in mind that the consumer GearVR supports the Samsung Galaxy S6, S6 Edge, S6 Edge+, and Note 5 handsets only at present: _Set up Unity for Android development_. _Install the USB drivers for your phone_. Enable developer settings?on your phone by following? this guide, then enable USB debugging on the developer menu. Finally, follow the detailed instructions