FDM系统调制与解调.pdfVIP

XX 大学毕业设计 （论文） FDM 技术及其Matlab 仿真 摘要 随着数据业务的爆炸增长，数据信道带宽需求不断增加，由于信道资源有限， 要想在有限的信道中尽可能多的传送数据，信道复用是目前最好的解决方法。频 分复用（Frequency-division multiplexing ，FDM ）技术，特点是所有子信道传输的 信号以并行的方式工作，每一路信号传输时可不考虑传输时延，因而取得了非常 广泛的应用。本论文根据频分复用的通信原理，建立了频分复用通信系统模型， 运用 Matlab 软件采集三路语音信号，选择合适的高频载波进行调制，得到复用 信号；然后设计带通滤波器、低通滤波器，从复用信号中恢复所采集的语音信号； 模拟了调制、信道传输、解调等通信过程，实现了多路语音信号的传输。 关键字：FDM ；高频调制；滤波器设计；信号恢复 第页 1 XX 大学毕业设计 （论文） FDM 技术及其Matlab 仿真 Abstract With the explosive growth in data services, the demand of channel bandwidth continues increasing. Due to the limited channel resources, in order to transport information as much as possible in the limited channel, channel multiplexing is the best solution. Frequency-division multiplexing technology, which transports signals in all sub-channels in a parallel manner, and the transmission delay of each sub-channel can take no consideration, has become widely used. In this paper, according to the frequency-division multiplexing principles, establish a frequency-division multiplexing communication system, use Matlab software to capture three-way voice signals, select the appropriate high-frequency carrier modulation, get the multiplexed signal, and then design three different kinds of bandpass filters and a kind of lowpass filter to recover the voice signal from the multiplexed. What’s more, simulate signal modulation, channel transmission and signal demodulation of communication process. Finally, achieve the goal of multi-channel transmission of voice signals. Key Words ：FDM ；High Frequency Modulation ；Filter Design ；Signal Recovery 第页 2 XX 大学毕