2-培训材料富士通培训存储培训_201908 eternus cli users guide_p2x0-1210-24en.pdf

P2X0-1210-24ENZ0 FUJITSU Storage ETERNUS DX S4/S3 series Hybrid Storage Systems, ETERNUS AF series, ETERNUS DX200F All-Flash Arrays ETERNUS CLI Users Guide CLI operations for configuration, management, and maintenance This page is intentionally left blank. Preface This manual describes how to use the Command Line Interface (CLI) to configure and manage the FUJITSU Storage ETERNUS DX60 S4/DX100 S4/DX200 S4, ETERNUS DX500 S4/DX600 S4, ETERNUS DX60 S3/DX100 S3/DX200 S3, ETERNUS DX500 S3/ DX600 S3, ETERNUS DX8100 S3/DX8700 S3/DX8900 S3, ETERNUS AF250 S2/AF650 S2, ETERNUS AF250/AF650, or ETERNUS DX200F (hereinafter referred to as ETERNUS DX/AF). This manual is written for standard-level users who are familiar with the basic functions of the ETERNUS DX/AF. This manual is written for cont roller firmware versions V10L80 (V10L81 for Unified storage) and later. Some of the functions and operations herein may not be supported for firmware versions earlier than V10L80. Twenty-Fourth Edition April 2018 Content and Structure This manual contains the following nine chapters and appendices: ● Chapter 1 Overview This chapter introduces the ETERNUS DX/AF Command Line Interface (CLI). ● Chapter 2 Status Display This chapter explains the commands used for displaying the status details for the ETERNUS DX/AF as a whole, as well as for various ETERNUS DX/AF components. ● Chapter 3 Configuration Settings and Display This chapter explains the commands used for RAID group management, volume