小松挖掘机资料：E_PC200-8 Monitor_s.pptVIP

PC200-8 Monitor Operation Contents Outline of Screens and Switches (1) Outline of Screens and Switches (2) Function Switches Start-up Screen and End Screen Service Meter Reading with Key-OFF Work Mode Selection (1) Work Mode Selection (2) Travel Speed Selection Auto-Decelerator Selection Wiper Switch/Washer Switch Air-Conditioner Display Screen ECO Display/Energy-Saving Guidance Display Camera Screen Camera Screen (Warning, Error Generation and Other Operations) Service Meter/Clock Selection Maintenance Screen User Menu Screen Breaker/Attachment Setting Breaker Mode Flow Rate Setting Change Attachment Flow Rate Setting Change Screen Adjustment Clock Adjustment Language Setting Economy Mode Adjustment Cautions Service Menu Screen Monitoring Failure History Failure History Reset Maintenance History Maintenance Mode Change Telephone Number Setting Default Setting Work Mode Display on Power-ON Unit Selection Attachment-yes/no Attachment/Maintenance Password Setting Camera Setting ECO Display Setting Breaker Automatic Judgment Setting Set All to Default Adjustment Adjustment (Pump Absorption Torque (R)) Adjustment (Low Speed) Adjustment (Attachment Flow Adjustment) Operation on Reduced Cylinders Cylinder Cut-Out Mode Operation (Hold) No-injection Cranking Fuel Consumption Display Password Setting (1) Password Setting (2) Password Entry Screen on Power-ON Attachment/Maintenance Password Setting List of Cautions and Icons Monitoring Code Table-1 Monitoring Code Table-2 Monitoring Code Table-3 Monitoring Code Table-4 Monitoring Code Table-5 User Code Table Error Code Table-1 Error Code Table-2 Error Code Table-3 Video: With/without attachment ? Explain that pressing F6 SW after selecting 03: With/Without Attachment on the Default screen changes the display to the With/Without Attachment screen. ? Explain that you should select With Attachment to mount an attachment pipe on the standard vehicle (SDT) (for site mounting service) because Without Attachment is set as the d