无损检测工艺规程范本(磁粉检验)实用文档系列.pdfVIP

本文源自： 无损检测招聘网 QCD-014 Rev.:0 Page:1 of 8 Title: PROCEDURE FOR MAGNETIC PARTICLE EXAMINATION PROCEDURE FOR MAGNETIC PARTICLE EXAMINATION 磁 粉 检 验 操 作 工 艺 规 程 CONTROLLED 在控本□ UNCONTROLLED 非在控本□ COPY NO 副本编号： PREPARED BY 编制： DATE 日期： REVIEWED BY 审核： DATE 日期： APPROVED BY 批准： DATE 日期： NJBST Co.,Ltd. QCD-014 Rev.:0 Page:2 of 8 Title: PROCEDURE FOR MAGNETIC PARTICLE EXAMINATION DEMONSTRATION CERTIFICATION This is to certify that this procedure has been demonstrated on a test specimen with known defects to the satisfaction ofthe Authorized Inspector according to T-150 of ASME Code Section V, as required by Appendix 6 of Section Ⅷ Div.1. Test Specimen No.: Demo. Report No.: NDE Level Ⅲ: AI: NJBST Co.,Ltd. QCD-014 Rev.:0 Page:3 of 8 Title: PROCEDURE FOR MAGNETIC PARTICLE EXAMINATION 1. General 1. 概述 1.1 This procedure is applied to the magnetic particle examination 1.1 本规程适用 于 ASME 规范产品 of ferromagnetic materials and welds for ASME Code items. 铁磁性材料和焊缝的磁粉检验。 1.2 The magnetic particle examination method is suitable for 1.2 磁粉检验方法适用于在铁磁性 detecting cracks and other discontinuities on or near the surface in 材料表面或其附近探测裂纹和其它 ferromagnetic materials. 不均匀性缺陷。 1.3 This procedure is applied to wet continuous magnetization by 1.3 本规程适用于磁轭湿粉连续磁 yok