毕业设计（论文）-一种紧凑型组合式大行程油缸设计.pdfVIP

一种紧凑型组合式大行程油缸设计 摘要 由于实际设备安装空间的限制及性能要求，往往需要在一个尽可能小的空间内安装一 个行程很大的液压缸，满足其他部分的性能要求，故经常无法选用或使用标准油缸甚至多 级伸缩油缸。因此，我们需要一种结构紧凑的大行程油缸，以满足安装空间和大行程的双 重要求，组合式油缸能够很好地满足以上两个条件。 这种组合式油缸本质上由两个油缸组合 成，其中一个油缸活塞杆固定 缸体运动， 其运动的缸体与另一油缸缸体连成一体，从 使得组合油缸的本体长度减小，但行程加倍。 本次设计通过额定压力确定缸体内径，并在此基础上完成一系列尺寸的计算和校核，最后完 成油缸总装图、缸筒及活塞杆零件图。 关键词：液压缸；组合式；大行程；安装紧凑； II Abstract Due to the limitation of the equipment installation space and the performance requirements, it is often necessary to install a hydraulic cylinder with a large stroke within a small space as far as possible,in order to meet the performance requirements of other parts, so it is often impossible to choose or use a standard hydraulic cylinder or even a multi-stage telescopic hydraulic cylinder.Therefore, we need a kind of structure compact big stroke hydraulic cylinder, in order to meet the installation space and the big stroke of the dual requirements, combined hydraulic cylinder can well meet this above two conditions.This kind of combined type hydraulic cylinder is essentially composed of two hydraulic cylinders, one of which is fixed by the piston rod while the cylinder moves, and the moving cylinder is connected with the other cylinder block, thus reducing the length of the body of the combined cylinder and doubling the stroke.This design through the rated pressure to determine the cylinder body diameter, and on this basis to complete a series of size calculation and check, then complete the hydraulic cylinder assembly diagram, cylinder barrel and piston rod parts diagram. Key Words： The hydraulic cylinder; ombined;Big trip; ompact installation; hi 目录 第1章绪论1 • 设计目的 1 • 设计意义 1 • 国内外研究现状1 第2章 设计内容及总体方案设计 3