客厅智能照明系统设计与实现材料资料.docxVIP

摘 要 PAGE PAGE I 摘 要 传统照明系统的一开一关控制方法限制了当代人的快节奏生活方式，同时也限制了其在现代家庭中的功能性应用。人们对照明的需求从最初的提供亮度的基本功能到现在产生了多方面的需求。相比传统的照明系统，客厅智能照明系统不仅能控制照明光源的开关与亮度，而且有着管理智能化和操作简单化的特性。 本文主要设计了一种基于Arduino的客厅智能照明系统。系统以Arduino处理器为核心，使用Arduino Mega 2560开发板，与红外线传感器、光敏电阻传感器相连，以实现对客厅LED照明的智能控制，使用ESP 8266WIFI模块连接中国移动物联网平台OneNet，利用EDP协议上传光照数据以达到实时监测的目的。文章详细介绍了客厅智能照明系统的硬件电路和软件设计。硬件部分基于Arduino Mega 2560开发板进行电路连接。软件部分利用C/C++语言进行编程，并采用模块化设计。本系统的硬件电路简单，子程序通用，达到功能设计要求。 在整个客厅智能照明系统设计完成后，对其进行调试与实时监测。测试结果为：该系统能够正常实现对LED亮灭的控制、亮度的调节和软启功能，并在OneNet网站上实时监测到周围环境的亮度。 关键词：智能照明；Arduino 处理器；光敏电阻传感器；红外线传感器 ABSTRACT PAGE PAGE II ABSTRACT The on-off control method of traditional lighting restricts the fast-paced lifestyle of contemporary people, and also limits its functional application in modern homes. From the basic function of providing brightness to the present, there are many demands. Compared with the traditional lighting system, the living room intelligent lighting system can not only control the brightness and switch of the lighting source, but also has the characteristics of intelligent management and simple operation. This article mainly designs a living room intelligent lighting system based on Arduino. The system uses the Arduino processor as the core, uses the Arduino Mega 2560 development board, connects with infrared sensors and photoresistor sensors to achieve intelligent control of the living room LED lighting, uses the ESP 8266WIFI module to connect to the China Mobile Internet of Things platform OneNet, and uses the EDP protocol to upload Illumination data and commands to control LED lights. The article details the hardware circuit and software design of the living room intelligent lighting system. The hardware part uses the Arduino Mega 2560 development board for circuit connection. The software part is programmed with C / C ++ language and adopts modular design. The hardware circuit of this system is simple, and the subroutines are universal, meeting the functional design requirements. A