设计说明书 基于串口通信的无线传感器网络系统上位机软件开发.pdfVIP

中文摘要 本课题采用 Visual C++ 6.0 开发工具，利用安全性较高的 Access 作为后台 数据库，以软件工程理论为指导，通过一个病员监控系统来体现，实现上位机 件基本功能，达到研究本课题的目的。无线传感器网络的低成本特点和灵活快速 的部署能力，成为日常生活的重要组成部分，极大地改变我们的生活。本文主要 设计数据采集系统中的上位机控制，通过串口通信的程序来控制 PC 机与单片机 之间的串口通信，进而实现对单片机的数据进行采集和设置。该系统界面友好， 操作简单，易学易用，从总体方案上力求达到该软件所需的目标要求。 关键词 串口通信，MSComm 控件，C++ ，无线传感器网络 第 Ⅰ 页 共 Ⅰ 页 外文摘要 Title Serial communication based on wireless sensor network System PC software Abstract The issue uses Visual C ++ 6.0 as development tool and Access with the higher security as the background database. The topic that takes software engineering theory as a guide is by means of monitoring system to reflect and realize the basic functions of PC software so as to achieve the purpose of studying the subject. The sensor that possesses not only low-cost characteristic but also rapid, flexible deployment capabilities has become an important part of our everyday life and greatly changed our lives. In this paper, the main design is PC control of data acquisition system. The single chip data is gathered and set by the way of calling serial communication procedures to control the serial communication between PC and MCU. The system possesses friendly interface, simple operation. It also can be learned and used easily. It is striving to achieve the required objectives and requirements of the software at the aspect of the overall program. Keywords serial communication, MSComm control, Visual C++ 6.0, WSN 第 Ⅰ 页 共 Ⅰ 页 目 录 1 引言1 1.1 课题研究背景及研究意义1 1.2 国内外研究与发展现状2 1.3 VISUAL C++ 串口通信编程概述3 1.4 本章小结9 2 系统总体设计9 2.1 上位机软件需求分析9 2.2 系统功能模块设计10 2.3 数据库总体设计13 2.4 系统实现框图21 2.5 本章小结22 3 系统详细设计22 3.1 系统主控平台22 3.2 登录窗