CA6140车床拨叉831007 加工工艺及钻M8底孔夹具设计铣断前.pdfVIP

说明书中文摘要 CA6140 车床拨叉加工工装设计 摘要车床变速用拨叉是某企业产品的主要零件之一。于是需要设计关键工序的专用 夹具及加工用组合机床，而且夹具采用液压驱动，组合机床采用液压滑台。工艺设 计以保证质量稳定、生产可靠为原则。对工件进行加工时，为了保证加工要求，首 先要使工件相对于刀具及机床有正确的位置，并使这个位置在加工过程中不因外力 的影响而变动。为此，在进行机械加工前，首先要将工件装夹好。用夹具装夹工件 有下列优点:能稳定地保证工件的加工精度;能提高劳动生产率:能扩大机床的使 用范围;能降低成本。 关键词拨叉工艺设计机床加工过程 外文摘要 Variable-speed lathe processing equipment design Abstract Variable speed lathe with a fork is the product of one of the main parts. So the key processes necessary to design a special fixture and the combination of processing machine tools , fixtures and the use of hydraulic drives , hydraulic slide combination of the use of Taiwan machine too 1. Process design to ensure stable quality, reliable production of principle. Processing of the workpiece , the processing requirements in order to ensure , first of all to the workpiece and the machine tool relative to a correct position , and this location is not in the process due to the impact of extemal changes. To this end, during the pre-machining the first workpiece to a good setup. Workpiece clamping fixture with the following advantages: can guarantee the stability of the machining accuracy of workpiece; will increase labor productivity; to expand the use of machine tools; to reduce costs. Keywords fork Process design Machine tool Process - 2 - 需要 CAD 图纸，扣扣 414951605 , Settings\Adn归istrator\桌面\l\7-拨叉831007工艺和夹具设计\7-钻M8底孔夹具[慌断前] \; ;工艺工序韦. dwg : Pa~ 回转压块. dwg 夹具体. dwg 缸lt oCAII 图形 AutoCA[1 图开 AutorAD 图形 :25(1 Kß 65 KB