《IT6000系列人机界面用户手册》-英文.pdfVIP

User Guide IT6000 Human Machine Interface (HMI) A00 Data Code: Contents Approvals 2 1. Product Information 3 1.1 Nameplate and Designation Rule 3 1.2 General Specification 4 1.3 Mounting Dimensions of the IT6000 6 2. Installation 7 2.1 Installation Environment 7 2.2 Mounting Method 7 3. Wiring 8 3.1 Terminal Description 8 3.2 Wiring Description 9 4. Quick Setup 14 4.1 Tools Requirements 14 4.2 Wiring 16 4.3 Installation of InoTouch Editor 17 4.4 Creating a Project 20 4.5 Transferring the Project Data 34 4.6 Using the HMI 40 5. System Setting 42 6. Troubleshooting 45 Revision History 47 Safety Information and Precautions Disclaimer • The drawings in the manual are shown for description only and may not match the product you purchased. • The instructions are subject to change, without notice, due to product or software upgrade, specification modification as well as efforts to increase the accuracy and convenience of the manual. • Contact our agents or customer service center if you have problems during the use. Approvals Certification marks on the product nameplate indicate compliance with the corresponding certificates and standards. Certification Mark Directives Standard EMC directives 2014/30/EU EN61131-2 CE LVD directives 2014/35/EU EN 61010-1, EN61010-2-201 RoHS directives 2011/