GT50L奥林分体式燃烧器控制系统设计.pdfVIP

  • 24
  • 0
  • 约7.12万字
  • 约 60页
  • 2021-08-09 发布于湖北
  • 举报
上海交通大学 硕士学位论文 GT50L奥林分体式燃烧器控制系统设计 姓名:曹巍 申请学位级别:硕士 专业:机械工程 指导教师:刘利;徐建乡 上海交通大学工程硕士学位论文 摘 要 最后设计了控制系统的硬件配置;重点给出模糊控制等PLC 子程序; 并对系统调试进行了分析。 关键词: 燃烧器,控制,仿真,PLC II 上海交通大学工程硕士学位论文 ABSTRACT STUDY ON OILON GT50L BURNER CONTROL SYSTEM WITH PLC FUZZY-PID TECHNOLOGY ABSTRACT As the key part of the boiler combustion system, the burner consumes the most energy. In order to save the energy and protect the environment, it is necessary to design one better burner combustion control system which can improve the supply ratio of gas and air. Based on three gas hot water boilers combustion control of one thermal power plant, we design one gas and air control system for OILON GT50L burners. The gas control system takes use of PLC FUZZY-PID controller .Comparing the difference between sampling boiler output water temperature and set value, it deduces the proportion, integral and differential parameter of PID controller and thus adjusts the position of gas valve. After MATLAB/SIMULINK simulating, we found the fuzzy PID controller possesses virtues of small overshoot, robustness, adaptability and rapid respond time and overcomes the shortcoming of traditional PID controller, so III 上海交通大学工程硕士学位论文 ABSTRACT it can be applied to more boiler control system. Concerning the proper air supply, we adopted boiler heat balancing analysis and GT50L combustion experiment and got oxygen

文档评论(0)

1亿VIP精品文档

相关文档