国外主要无损检测标准题录(超声检测).doc

国外主要无损检测标准题录(超声检测) 发布时间：10-10-15 来源： 点击量：1740 字段选择：大?中?小 　　国际标准: 　　ISO 2400-72E 用于校准超声检测设备的钢焊件参考试块(用于t≤50mm钢管焊缝)(INDT,82-4) 　　Welds in steel -- Reference block forthe calibration ofequipment for ultrasonic examination 　　ISO 4064-3-99 封闭管道中液体流量的测量使用速调整超声 \o 流量计 流量计法 　　ISO 4386/1:1992 金属多层滑动轴承第1部分：粘接强度的超声无损检验 　　Plainbearings -- Metallic multilayer plain bearings -- Part1:Non-destructive ultrasonic testing of bond 　　ISO 4386/2 金属多层滑动轴承第2部分：支承面金属层厚度≥2mm的粘接破坏性试验 　　ISO 5180-80 超声检验用钢制校准试块 　　ISO 5577:2000 无损检测--超声检测--术语 　　Non-destructive testing -- Ultrasonic inspection--Vocabulary 　　ISO 9303:1989 无缝和焊接(埋弧焊除外)承压钢管--探测纵向缺陷的全圆周超声检验 　　Seamless and welded (except submerged arc-welded) steeltubesfor pressure purposes -- Full peripheral ultrasonictesting for thedetection of longitudinal imperfections 　　ISO 9305:1989 无缝承压钢管--探测横向缺陷的全圆周超声检验 　　Seamless steel tubes for pressure purposes -- Full peripheralultrasonic testing for the detection of transverseimperfections 　　ISO 9764:1989 电阻焊和感应焊承压钢管--探测焊缝纵向缺陷的超声检验 　　Electric resistance and induction welded steel tubes forpressure purposes -- Ultrasonic testing of the weld seam for thedetection of longitudinal imperfections 　　ISO 9765:1990 埋弧焊承压钢管--探测焊缝纵向及/或横向缺陷的超声检验 　　Submerged arc-welded steel tubes for pressure purposes --Ultrasonic testing of the weld seam for the detection oflongitudinal and/or transverse imperfections 　　ISO 10124:1994 受压无缝和焊制(埋弧焊除外)钢管分层缺陷的超声检测 　　Seamless andwelded (except submerged arc-welded) steel tubesfor pressurepurposes -- Ultrasonic testing for the detection oflaminarimperfections 　　ISO 10332:1994 受压无缝和焊制(埋弧焊除外)钢管验证水压密封性的超声检测 　　Seamless andwelded (except submerged arc-welded) steel tubesfor pressurepurposes -- Ultrasonic testing for the verification ofhydraulicleak-tightness 　　ISO 10375:2002 无损检测--超声检验--探头及其声场的表征 　　Non-destructive testing -- Ultrasonic inspection - -Characterization of search unit and sound field 　　ISO 10543:1993 无缝和热拉缩径焊接承压钢管--全圆周超声厚度检查 　　Seamless and hot-stretch-reduced welded steel tu