水箱温度控制[1](1).docVIP

【摘要】 本论文主要阐述了温度控制加热器的工作原理，利用PLC对系统进行编程分析，其中介绍了许多关于温度控制系统的器件，让大家能更进一步的明白温度控制的过程及其硬件。在编程中还特别介绍了有关模拟量的转换，对PID也进行了详细的简介。 随着社会的发展需要，温度控制系统已经普遍被人们接受。温度控制在现阶段已有很多地方用到如：热水器、锅炉等。人们生活中所必须的设备都需要温度控制来解决。温度控制系统设计起来简单，用起来更方便。 关键词：编程 控制系统 热水器 【Abstract】 　This thesis mainly describes the working principle of the heater temperature control, using PLC system programming analysis, which introduces many about temperature control system components, let everybody can further understand the process of temperature control and its hardware. In programming are particularly introduces the analogue conversion of PID a detailed introduction also. With the development of the society needs, the temperature control system has been generally be accepted by people. Temperature control at present has many places use such as: water heater, boiler, etc. Peoples life must be the devices are need to temperature control to solve. Temperature control system design easy, use up more convenient. Key words: programming Control system Water heater 目录 1水箱温度控制系统简介.......................... 1.1温度控制系统作用............................. 1.2系统设计的方案................................ 1.3用PLC设计的思路............................. 2水箱控制系统的硬件........................... 2.1 PLC组成和工作原理........................... 2.1.1 PLC的组成..................................... 2.1.2 PLC的工作原理............................... 2.2输入输出设备选用............................. 2.2.1 EM235温度模块............................... 　2.2.2 PT-100...................................... 　2.2．3 S7-200PLC及CPU模块的选择............... 　2.2.4双向晶闸管............................... 2.3设计工作过程分析.......................... 2.4硬件接线图................................ 3 PID简介................................... 3.1 PID模块介绍................................. 3.2 PID算法.................................. 3.3 PID参数的整定方法........................... 　3.3.1 P 　3.3.2确定控制器参数............................ 　3.3.3选择参数.................................. 3.4 PID回路表及回路指令........