绝缘电阻测试仪User guide S1-568 and S1-1068.pdfVIP

M S1-568, S1-1068 5 kV, 10 kV High Performance DC Insulation Resistance Testers USER MANUAL • A test can be started at any time via remote control. Measurement G SAFETY WARNINGS connections must be handled only with the remote control indicator beacon removed from its socket. Safety warnings must be observed during use: • In the event of the instrument failing in remote control mode the test • The circuit under test must be switched off, de-energised, isolated must be stopped manually by pressing the TEST button. and checked to be safe before insulation test connections are made. • Switch the instrument OFF, and disconnect the mains supply, Make sure the circuit is not reenergised whilst the instrument is measurement leads, and all other equipment before opening the case connected. to change the battery. The instrument must not be operated with the • Only Megger supplied test leads rated for this instrument must be case open. DANGER! Hazardous voltages are exposed with the mains used. connected and the case open. • Circuit terminals must not be touched during an insulation test or • If performing a two-wire test without guard using the S1-1068, insert the when the test