DZ60振动打桩锤的设计.docxVIP

— PAGE \* Arabic 1 — DZ60振动打桩锤的设计 本科毕业设计（论文）通过答辩   本科毕业设计（论文）通过答辩  Abstract  The vibration hammer is one kind of the inertial oscillation machinery, belongs to in the vibration use machinery the plane double shaft type driver. The vibration hammer uses friction to reduce the force between the mechanical vibrations pile and the soil, and depends upon it to be self-possessed or the sur- pressure function issues the goal of stake sinking. The vibration hammer divides the mechanical type and the hydraulic pressure type two kinds, the hydraulic pressure vibration hammer application are less. The vibration hammeruses the mechanical type direction detection driver. It is loaded with same lack of impartiality the piece and the opposite direction rotation axis by two is composed, on two axes lack of impartiality the piece produces the centrifugal force  offsets or counteract one another in the horizontal side upward force component, but in vertical direction force component superimposition. The vibration hammer mainly by the electric motor, the guide rod, the compression spring, horizontal beam reducing inspires, a vibration box of body, the belt pulley and so on is composed. Has the penetrating power strongly, the quality of stake sinking is good, firm durable, the breakdown few, the structure is compact, the low noise, the high efficiency, does not have merit and so on pollution.  Key words: Vibrates the machinery Vibratory pile hammer  the inertial oscillation the spring reducing inspires  本科毕业设计（论文）通过答辩  目录   本科毕业设计（论文）通过答辩  3.2选择电动机 (20)  第4章振动桩锤的主参数计算 (22)  4.1激振力的计算 (22)  4.2计算实际振幅 (23)  4.2.1根据提供的频率选择工作土壤的类型 (23)  4.2.2振幅A的确定 (23)  4.3计算实际偏心力矩 (24)  4.4功率的计算 (25)  第5章减振弹簧的设计与计算 (27)  5.1减振弹簧的结构选择 (27)  5.1.1选取螺旋弹簧的类型 (27)  5.1.2选取弹簧的材料并确定其主要性能参数 (27)  5.2圆柱螺旋弹簧的设计计算 (27)  5.2.1确定单根弹簧的最大工作载荷 (27)  5.2.2选择旋绕比 (28)  5.2.3计算钢丝直径 (28)  5.2.4计算弹簧中径 (28)