Abaqus裂纹模拟调研.docxVIP

— PAGE \* Arabic 1 — Abaqus裂纹模拟调研 实例一、ABAQUS XFEM Tutorial: 3D Edge Crack  Creating the Uncracked Domain  1.Open ABAQUS/CAE 6.9 or later.  2.Double click on Parts. Enter name as Solid, Modeling Space is 3D, Type is  Deformable, Base Feature is Solid and Approximate Size is 5. Click Continue.  http://./doc/d5120b760b5636.html e the rectangle tool to draw a square from (-2,-2) to (2,2). Click Done. Enter 4  for the depth. Click Ok.  4.Double click on Materials. Enter name as Aluminum. Click on Mechanical, then  Elasticity, then Elastic. Enter Youngs modulus as 70 GPa and Poissons ratio as  0.33. Click on Mechanical, then Damage for Traction Separation laws, then Maxps  Damage. Enter a value of 500 MPa. From the Suboptions menu click on Damage Evolution. Enter Displacement at Failure as 1. Click Ok. Click Ok.  5.Double click on Sections. Name as Main. Accept default settings by clicking  Continue. Select Aluminum as material. Click Ok.  6.Expand Parts then expand Solid. Double click on Section Assignments. Select the  domain. Click Done. Accept default settings. Click Ok.  7.Expand Solid. Double click on Mesh. From the top menu select Seed, then Edge  By Number. Select the Domain. Click Done. Enter 21 as Number of elements along the edges. Hit Enter. Click Done.  8.From the top menu select Mesh, then Controls. Select Hex, Structured. Click Ok.  From the top menu select Mesh, then Part. Click Yes.  9.Expand Assembly. Double click on Instances. Select Solid. Accept default settings  by clicking Ok.  Creating the Cracked Domain  10. Double click on Parts. Enter name as Crack, Modeling Space is 3D, Type is Deform  able, Base Feature is Shell, Type is Extrusion and Approximate Size is 5. Click Conti nue.  11. Draw a line from (-2,0) to (-1,0). Click Done. Enter 4 for depth. Click Ok.  12. Expand Assembly, then double click on Instances. Select Crack. Accept d