NXPSSL21083高压8WLED驱动解决方案.pdfVIP

ADI ADP1650 1.5A LED 闪光驱动方案 ADI 公司的 ADP1650 是集成了 I2C 兼容接口的 1.5A LED 闪光驱动器 .器件集成了 1.5MHz 或 3.0MHz 同步电感升压转换器 ,I2C 兼容接口和 1500mA 电流源 .火炬模式电流高达 200mA, 效率大 于 90%( 峰值 ),主要用在照相手机和智能手机以及数码相机 ,摄像机和 PDA. 本文介绍 了 ADP1650 主要特性 ,应用电路以及 ADP1650 评估板套件主要特性 ,详细电路图和材料清单 . 1.5 A LED Flash Driver with I2C-Compatible Interface The ADP1650 is a very compact, highly efficient, single white LED flash driver for high resolution camera phones that improves picture and video quality in low light environments. The device integrates a programmable 1.5 MHz or 3.0 MHz synchronous inductive boost converter, an I2C-compatible interface, and a 1500 mA current source. The high switching frequency enables the use of a tiny, 1 mm high, low cost, 1 μHpower inductor, and the current source permits LED cathode grounding for thermally enhanced, low EMI, and compact layouts. The LED driver maximizes efficiency over the entire battery voltage range to maximize the input-power-to-LED-power conversion and minimize battery current draw during flash events. A programmable dc battery current limit safely maximizes LED current for all LED VF and battery voltage conditions. Two independent TxMASK inputs permit the flash LED current and battery current to reduce quickly during a power amplifier current burst. The I2C-compatible interface enables the pro-grammability of timers, currents, and status bit readback for operation monitoring and safety control. The ADP1650 comes in a compact 12-ball, 0.5 mm pitch package and operates within specification over the full