第10章　IGBT模块的电磁兼容性设计.pdfVIP

Chapter 10 EMC Design of IGBT Module CONTENTS Page 1 General information of EMC in Power Drive System ··························· 10-1 2 EMI design in Power Drive System ··························· 10-4 3 EMI countermeasures in applying IGBT modules ··························· 10-10 In this chapter, EMC measures when IGBT module is applied are introduced. 1 General information of EMC in Power Drive System Recently EMC measures coping with European CE Marking and Japanese VCCI(Voluntary Control Council for Information Technology Equipment) standards are indispensable in designing power electronic equipments such as Power Drive System(PDS) and Uninterruptible Power Source(UPS) using IGBT modules. EMC is Electro Magnetic Compatibility, which is classified into EMI (Electro Magnetic Interference) and EMS (Electro Magnetic Susceptibility). EMI is adverse effects of electronic devices on peripheral equipments, and it is also called Emission. There are two kinds of EMI, one is conducted emission which leaks to power line and the other is radiated emission radiated as electromagnetic wave. EMS means immunity performance of electronic devices against disturbance, such as electromagnetic wave, voltage sag, electrostatic discharge, EFT/burst and lightning surge from the surrounding and it is also called Immunity. These are simplified as shown in Fig.10-1. Since IGBT modules turn on and off several hundreds of voltage and several hundreds of current in several hundreds nanoseconds, both conducted emission and radiated emission are easily generated due to high dv/dt and di/dt of IGBT module. It is important to reduce those emission when designing po