TPS24713芯片应用笔记.pdfVIP

Application Report SLVAE29– March 2019 Discrete solution for TPS24711 to achieve insertion ON delay and fast turn OFF Johnny Guo Jack Chen ABSTRACT The TPS24711 is an easy-to-use, 2.5 V to 18 V, hot-swap controller that safely drives an external NMOS. The programmable current limit, MOSFET power limit and fault time protect the supply load and MOSFET at startup. While in some chassis Switch, Router and Server application, insertion turn ON delay and fast turn OFF feature is required due to input voltage ringing in insertion and removal. This application report introduces a performance-cost-optimization discrete solution with TPS24711 to achieve these features. Simulation and experiment test result is also given. Contents 1 Introduction 2 2 Application Problem in Insertion and Removal 2 3 Insertion Turn ON delay and Fast Turn OFF Circuit 3 4 Experiment Test Result 6 5 Conclusion 7 6 Reference 7 List of Figures 1 Board VIN and Backplane Bus Voltage Ringing in Insertion 2 2 Board VIN and VOUT in Removal 3 3 Simulation Circuit 4 4 Insertion Turn ON Delay Simulation Result 5 5 Fast Turn OFF Simulation Result 5 6 Insertion Turn ON Delay Test Result 6