T4服务器Solaris操作系统安装截图.docxVIP

文档来源为:从网络收集整理 文档来源为:从网络收集整理.word版本可编辑.欢迎下载支持. PAGE PAGE 10 T4-4 安装 Configuring ILOM With the ILOM CLI and a Serial Connection The default serial port speed is 9600 baud, 8 bits, no parity, 1 stop bi no handshake. Log in to the ILOM SP. User =root Pwd = changeme Set the working directory. cd /SP/network 配置ILOM 网络管理口的IP set pendingipaddress= set pendingipdiscovery=static set pendingipnetmask= set pendingipgateway= set commitpending=true set state=enabled Verify the changes. show /SP/network Log out of the ILOM SP. Exit Configuring the SPs Clock Properties via CLI To examine the current settings: -show /SP/clock To manually set the ILOM clock property values: - set /SP/clock datetime= - set /SP/clock timezone=EST Configuring the SPs Clock Properties via GUI Root/changeme 默认用户名和密码 SECURING THE ILOM SERVICE PROCESSOR (SP)(不改) ssh-l root -SiPpaddr set /SP/users/root password=new password Verifying the Firmware Versions using the CLI - show /HOST sysfw_version Verifying the Firmware Versions using the GUI Preparing for the Update HOST POWER ON POST set /HOST/bootmode script=setenv auto-boot? false Power on the server start /SYS start /HOST/console SPARC T4-4, No Keyboard Copyright (c) 1998, 2011, Oracle and/or its affiliates. All rights reser OpenBoot 4.33.4, 130560 MB memory available, Serial #8. Ethernet address 0:21:28:fa:d9:7e, Host ID: 85fad97e. VERIFY / UPGRADE LSI SAS 2008 RAID CONTROLLERS Using the FCODE Facility (from OBP) {0} ok probe-scsi-all ok show-devs select /pci@400/pci@1/pci@0/pci@0/LSI,sas@0 {0} okshow-volumes select /pci@700/pci@1/pci@0/pci@0/LSI,sas@0 {0} okshow-volumes {0} okshow-children 9 a create-raid1-volume Show-volumes Devalias {0} ok boot cdro–ms Fromat Quit Reboot –cdrom # eeprom auto-boot?=true Eis补- 丁 打完后，init 6重启系统，，，看uname -a 版本号有升级