全自动固相萃取英文介绍.docxVIP

全自动固相萃取英文介绍 全自动固相萃取英文介绍 Introduction of Automated solid-phase extraction system Equipment name: Automated solid-phase extraction system Equipment Type: J2 Scientific SPEi Inline SPE Equipment Function: It is mainly used for sample pre-treatment,including food、agricultural 、animal and plant samples、aquatic products and the environment(soil,water,etc).Currently,it is used in the pre-pre-treatment of pesticide residues in Chinese herbal medicines. Equipment Key Technical Parameter: The PrepLinc SPEi from J2 Scientific accentuates our line of full-featured automated sample preparation instruments. Use the SPEi as a stand-alone automated SPE system or integrate with our AccuVap Evaporation Systems for complete sample prep. 1、Standout Features. + Use cartridges from 1mL - 15mL plus many specialty and flash chromatography columns + Perform multi-column procedures; up to 3 columns inline + Concentrate eluate to final volume or concentrate between prep processes with our AccuVap + Ability to perform reverse elution through cartridge for special applications + Unlimited elution volumes 2、Exceptional hardware software features make the PrepLinc SPEi an integral part of your prep lab. + Positive Pressure Elution for Sample and Solvents + Programmable Flowrates to 60 mls/min + Nitrogen Drying + Select from 12 Solvents for processing(3 standard) + Closed System + Pressure Monitoring + Customizable trays autosampler mat + Add up to 5 SPE column modules 3、Method Operations The SPE method is created by choosing and defining operations in the order they should occur. The available operations are as follows: Drying/Clear: clears lines of solvent Probe Rinse: forces an external rinse of the probe Mixing: use the syringe pump to mix sample in vial Condition: choose solvent, volume and rate of conditioning solvent through column Dilution: dilute sample in tube prior to injection